overview

Enerdrive ePOWER Industrial Battery Charger - 36 Volts - 20 Amps - 1 Output (EPI-3620)

Extremely Durable - Suitable for Boats and Industrial Applications

Suits AGM, Flooded and GEL Batteries

Australia Wide Shipping

ePOWER Industrial Battery Charger - EPI-2430 | EPI-3620 | EPI-4815

The ePOWER Industrial Battery Charger is available in three output voltages, 24V, 36V and 48V for usage in applications such as electric vehicles, fork lifts, floor cleaning machines, golf carts, and electric mobility scooters.

Enerdrive’s ePOWER Industrial Battery Charger is built to withstand vibration and exposure to dust or moisture typically found when used in typical on-board or industrial applications. Charge Algorithm updates and downloadable charger data logs are easily accessible via the use of a USB memory stick.

• Extremely Durable. A fully sealed die cast aluminum enclosure protects the charger from fluids and other contaminants. The design of the charger enclosure mirrors the internal components, protecting against shock and vibration.
• Programmable Charging. A USB host port allows for charger data logging downloads and charge algorithm uploads using a commonly available USB flash drive. This information can be used by OEMs to improve products, limit battery warranty claims and help technicians with troubleshooting issues.
• Battery Charging Flexibility. With over 25 algorithms to choose from that suit 90%+ of the batteries on the market today, the ePOWER Industrial charger also has the ability to create full custom algorithms to suit any type of lead acid battery. The charger is optimized to provide precise battery charging of different battery chemistries and battery manufacturers. These charge profiles allow charging to occur quickly and carefully, maximizing battery life and performance.
• *NB: Lithium Programming - May be programmed to charge Enerdrive Lithium batteries only - Must be factory programmed at the time of purchase with an Enerdrive Lithium battery system

Downloads:

• ePOWER-Industrial-Charger-Manual-Rev-1.2

Enerdrive-Xantrex-TBS eLite Battery Monitor (EN55010) Bank 1: Voltage / Current / Consumed Amphours / Remaining Capacity Bank 2: Voltage

Enerdrive ePRO PLUS Battery Monitor - 12,24 and 48VDC - 50mm Display - Incl. 500A Shunt and 5m Wiring Cable - Optional Temp Sensor (EN55050) Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with Enerdrive DC Modular products Battery temperature sensor capable (requires the optional temperature sensor cable which is sold separately) 2 Year Warranty

specification

Circuit Protection (Circuit Breakers and Fuses) – Choosing an Amperage Rating – Generally, circuit protection devices are installed to protect the wiring from overheating during overloads or faults. The simplest approach for selecting a circuit protection device rating is to choose an amperage rating that is equal to or less than the current rating, ampacity of the wire. If the wire ampacity is significantly greater than the load current, as might be with small loads or with wiring of increased size to reduce voltage drop, then a range of circuit protection values between the load requirement and the wire ampacity may be acceptable. Larger ampacity values reduce the probability of nuisance failures and reduce fuse heating; smaller ampacity values provide more conservative protection for the wiring.

In some cases, a product manufacturer may recommend that a specific fuse or circuit breaker size should be used with the product. If that is the case, the wire to the product should be selected so that the wire ampacity exceeds the recommended rating, which will protect both the product and the wiring.

*Excerpt from Blue Sea Systems https://www.bluesea.com/support/articles/Circuit_Protection/98/DC_Circuit_Protection

We recommend Enerdrive waterproof surface mount re-settable circuit breakers for performance and value;

• 25A Surface Mount Resettable Waterproof Circuit Breaker
• 30A Surface Mount Resettable Waterproof Circuit Breaker
• 40A Surface Mount Resettable Waterproof Circuit Breaker
• 50A Surface Mount Resettable Waterproof Circuit Breaker
• 60A Surface Mount Resettable Waterproof Circuit Breaker
• 70A Surface Mount Resettable Waterproof Circuit Breaker
• 80A Surface Mount Resettable Waterproof Circuit Breaker
• 100A Surface Mount Resettable Waterproof Circuit Breaker
• 120A Surface Mount Resettable Waterproof Circuit Breaker