overview

Isotherm CR130 DRINK Cruise Matched Drinks Fridge – 381752 (1130BA1AA)

12 or 24 Volts - 130 Litre Fridge Only with Grey Door

Suitable for Boats, Caravans, Motorhomes and RVs

We ship Australia wide - Ask us for a quote!

The Isotherm CR130D replaces the standard CR130 freezer compartment in the top section as extra space for drinks. It has three shelves and a vegetable bin, and the door has three shelves.  Bottle racks are available as option. This is the RH Hinge Version - the Left Hand Option is listed below under Options.
It is equipped with an inner light and a fan cooled compressor. The Isotherm CR130D is designed as a drinks fridge, without the freezer compartment. It is supplied as standard with the same shelf configuration as the CR130, however, designated bottle racks are available as an option.

Features:

• Food preparation compliant case
• Flush mounted - no protrusion into galley area
• Positive, flush closing mechanism
• Hermetic fan cooled compressor
• Contoured single piece plastic liner
• Adjustable shelves
• Internal light
• Low voltage cut off
• Radio interference suppression
• Internal rotary thermostat
• Utilises R134A ozone friendly refrigeration gas
• Can be operated as 12- 24 Volt DC

Door Hinge:
CR 130 has left or right doors with side mounted door locks and cannot be changed by the customer. The customer needs to purchase or advise whether they want the right hand model or the (different) left hand model.

Options:

• 381912 - Flush Mount Flange build-in to suit Cruise 90/130
• 381753 - Bottle Rack to suit 381750 and 381752. Suits 4 bottles - plastic coated wire.
• 1130BA7BA - Cruise 130L Drink Grey Line AC/DC Module LH Hinge Position (Same fridge but LH Hinge)

Matched Units:

Some of the Isotherm 130 litre fridges have the same the external dimensions as the Isotherm CR90F Freezer (the freezer has  has more insulation).
This is an excellent solution for a side by side fridge-freezer application.

Downloads:

• Optional Mounting Frame Dimensions
• Isotherm Cruise Marine Refrigerator Brochure
• Isotherm Cruise & Elegance Manual
• Isotherm Cruise 130L Drink Spare Parts List

Picture Shows a CR130 Fridge and the Separate Matching CR90L Freezer Unit
(Two Separate Units Mounted Side by Side)

Matching Units Available:

• 381750 CR130 - 130L Fridge / 8L Freezer
• 381754 CR90F - 90L Freezer Only (same external dimensions with extra insulation for freezer)

Other Cruise 130 Options Available:

• 1130BA7AA - Cruise 130L Drink Grey Line AC/DC Module RH Hinge Position
• 1130BA7BA - Cruise 130L Drink Grey Line AC/DC Module LH Hinge Position
• 1130BA1MK - Cruise 130L Drink With 3-Side Flush Mounting Frame DC Only RH Hinge Position
• 1130BA1NK - Cruise 130L Drink With 3-Side Flush Mounting Frame DC Only LH Hinge Position
• 1130BA7MK - Cruise 130L Drink Inox With 3-Side Flush Mounting Frame AC/DC Only RH Hinge Position
• 1130BA7NK - Cruise 130L Drink Inox With 3-Side Flush Mounting Frame AC/DC Only LH Hinge Position
• 1130BB1AA - Cruise 130L Grey Line DC Only RH Hinge Position (381750)
• 1130BB1BA - Cruise 130L Grey Line DC Only LH Hinge Position
• 1130BB7AA - Cruise 130L Grey Line AC/DC RH Hinge Position
• 1130BB1MK - Cruise 130L Inox With 3-Side Flush Mounting Frame DC Only RH Hinge Position (381713)
• 1130BB1NK - Cruise 130L Inox With 3-Side Flush Mounting Frame DC Only LH Hinge Position (381712)
• 1130BB7MK - Cruise 130L Inox With 3-Side Flush Mounting Frame AC/DC Only RH Hinge Position
• 1130BB7NK - Cruise 130L Inox With 3-Side Flush Mounting Frame AC/DC Only LH Hinge Position

Dimensions:

specification

Ventilation:
It is very important that the compressor/condenser unit is well ventilated and that cold air can enter at the bottom, pass behind the fridge and warm air can leave at the top in the area where it is mounted. The natural flow of air from below and upwards behind the fridge can be increased by arranging  ventilation openings at the rear. Make sure there is a free area of 15 - 23 sq.in. below and behind the refrigerator to allow ventilation air to pass behind from below. (see diagram below).

Electrical Connections:

When connecting the refrigerator electrically, it is important that following points are considered:
Always use cables of suffi cient area. The area in the following table should be regarded as a minimum. * Always connect the refrigerator directly to the battery or to the battery main switch on the plus circuit. Do not connect it via the boats own control panel or other diversions as this can cause a voltage drop in the power supply. Use the included fuse holder with a 15A fuse. Use 7.5A fuse in a 24 volt system. The fuse shall be mounted on the plus cable.
*Connect the red cable to the positive (+) terminal and the black to the negative (-) terminal. Use tab type terminals for the connection to the electronic unit and other cable connectors of sufficient size for the cable size selected. * Do not connect the refrigerator direct to a battery charger. The battery charger must be connected to the battery.

Battery Voltage (Shut Down) Sensor:
To protect the batteries from becoming completely discharged, a battery voltage sensor switches off the compressor automatically at the following levels:

Wire Dimensions:
The correct wire gauge  and type must be used.