Vetus Waste Water Tank - 60 Litres (BTANK60C)

682 L x 362 W x 373 H (mm) - High Grade Polythene - Seamless Construction

Incl. Fittings and Inspection Port

These tanks are made of high-grade linear synthetic materials, the same as all other rigid VETUS tanks and they are available with capacities of 25, 40, 60 or 80 litres. The centre point for a SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. These tanks will save considerable installation time.

Save time on your “black tank” installation with the VETUS BTANK25C. It is supplied with the following connections: Fixed hose connector Ø 19 mm for the breather line. Rotating hose connector Ø 38 mm with pick-up pipe, for waste water suction. A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. The BTANK25C comes complete with a pre-fitted inspection lid and is made in accordance with ISO 8099 standards.
The VETUS waste water tank is made from high-grade linear polythene and is designed to be odour free when used for the temporary storage of organic waste materials (suited for both “black“ and ”grey” water). The centre point for a SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. Further extras include a discharge pump and the WWCP waste management panel.

Includes:

• Fixed hose connector Ø 19 mm for the breather line
• Rotating hose connector Ø 38 mm with pick-up pipe, for water suction
• A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed.
• These tanks come complete with a screw down inspection lid installed
• Provided with ISO 8099 identification.

Options:

• BTANK25C - 25L Basic Tank Including Connectors
• BTANK40C - 40L Basic Tank Including Connectors
• BTANK60C - 60L Basic Tank Including Connectors
• BTANK80C - 80L Basic Tank Including Connectors

Parts: The following parts are already pre-assembled on the top of the tank.

1. Fitting 38 mm (1 1/2") with suction pipe (extraction)
2. Fitting 19 mm (3/4") breather (ventilation)
3. Inspection lid
4. One ø 43 mm (1 11/16") hole (4) for the supply has been drilled in the top.

Accessories:

• Angled Fittings - Angled synthetic fittings suitable for Flexible tanks (fresh water and waste) - Incl. Backing Plate
  • RT13B - Hose connection, Ø 13 mm, right angle, for rigid tanks
  • RT16B - Hose connection, Ø 16 mm, right angle, for rigid tanks
  • RT19B - Hose connection, Ø 19 mm, right angle, for rigid tanks
  • RT25B - Hose connection, Ø 25 mm, right angle, for rigid tanks
  • RT38B - Hose connection, Ø 38 mm, right angle, for rigid tanks

Downloads:

• Vetus BTANK Installation Manual

Optional Extras:

• Tank Gauges and Senders