overview

Xantrex TRUECharge2 Smart Battery Charger

30 Amp 24 Volt

Smart Chargers with 3 Outlets - Suits Flooded, AGM or Gel Batteries (804-2430)

Australia Wide Shipping

Product Overview:

Designed to meet the specific needs of marine and commercial markets. Available in 10A, 20A, 40A and 60A versions, each model packs a powerful universal charger (90-240Vac, 47-63 Hz) in an ultra-compact, lightweight package.
TRUECharge2 battery chargers are highly versatile and can be mounted in multiple positions, thanks to their inherent drip-free design characteristics. TRUECharge2 delivers outstanding low electrical interference, coupled with efficient, power factor corrected, multistage charging capability. Installation is a breeze, thanks to the easy access AC and DC wiring compartments. The easy-to-read display can be augmented with an optional remote panel.

Performance Features:

• 12-volt models available in 10A, 20A, 40A and 60 Amp
• Microprocessor-controlled, multistage charging algorithms
• Settings for two and three-stage charging
• Settings for flooded, gel, AGM or lead-calcium batteries
• Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
• Temperature-compensated charging
• Power factor corrected for efficient charging
• Battery-equalization feature
• Ability to charge ‘dead’ batteries
• Battery temperature sensor available (Part #808-0232-01)
• Optional remote display includes a maximum charger output control -see Optional Accessories below (Part #808-8040-00)

Protection Features:

• Reverse battery polarity protection
• Drip-proof design
• Over and under temperature protection
• DC over-voltage protection
• Battery overcharging protection
• Available in: 12-volt models: 10A, 20A, 40A, 60A 24 Volt models: 10A, 20A, 30A

Optional Accessories:

Accessories to suit Xantrex TRUECharge2 Smart Battery Chargers - Click on text line to view more details

	TRUECharge2 Battery Temperature Sensor (EN808-0232-01) Suits Xantrex TRUECharge2 Battery Chargers Sends temperature information to Battery Charger to automatically adjust voltage to prevent overcharge A must for all batteries installed in engine rooms or hot compartments
	Enerdrive-Xantrex-TBS eLite Battery Monitor (EN55010) Bank 1: Shows Voltage / Current / Consumed Amphours / Remaining Capacity Bank 2: Voltage
	Enerdrive ePRO PLUS Battery Monitor - 12,24 and 48VDC - 50mm Display - Incl. 500A Shunt and 5m Wiring Cable - Optional Temp Sensor (EN55050) Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with Enerdrive DC Modular products Battery temperature sensor capable (requires the optional temperature sensor cable which is sold separately) 2 Year Warranty
	Xantrex TRUECharge2 Remote Panel (EN808-8040-01) For Monitoring and Full Control of Xantrex TRUECharge2 Battery Chargers On / Off control of battery chargers Fault / Warning Display Displays each battery bank status

TRUECharge2 24-volt chargers are available with parallel stacking feature which allows you to double the output current when used with the optional REMOTE PANEL (part #808-8040-01).

specification

Three-Stage Charging

Multi-stage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:

• Bulk:  Replaces 70-80% of the battery’s state-of-charge at the fastest possible rate.
• Absorption:  Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.
• Float:  Voltage is reduced and held constant in order to prevent damage and maintain batteries at a full charge.

Power Factor Corrected (PFC)

Less shorepower is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shorepower breakers.